Technical Support:
Welcome to our technical support web page. To the right you will
find links to contact our technical services dept. Below you will
find links to the manufacturer's support web pages, links to
difficult to find manuals and software, and our exclusive tech
connect service.
Tech Connect Files

What is a TECH-CONNECT
?
A TECH-CONNECT
is downloadable file, created by Lakewood Automation, containing the
basic information needed to get two or more pieces of equipment
working together. The file may contain wiring information, a PLC
program, HMI screen files, DIP switch settings etc. There will be
enough information to get you through the initial learning curve. To
start downloading these files today, request your
username and password. Below are the latest
TECH-CONNECT files:
-
MS4800 to SR102AM or SR103AM
These drawings will explain how to wire the Omron STI MS4800
light curtain to either an Omron STI SR102AM or SR103AM safety
relay.
-
EStop to SR102AM or SR103AM
These drawings will explain how to wire a two-channel Emergency
Stop to either an Omron STI SR102AM or SR103AM safety relay.
-
EStop with F3SJ to SR102AM or SR103AM
These drawings will explain how to wire a two-channel Emergency
Stop with an Omron F3SJ light curtain to either an Omron STI
SR102AM or SR103AM safety relay.
-
EStop with MS4800 to SR102AM or SR103AM
These drawings will explain how to wire a two-channel Emergency
Stop with an Omron STI MS4800 light curtain to either an Omron
STI SR102AM or SR103AM safety relay.
-
Two Hand Control to SR104P
These drawings will explain how to wire a two-hand control
buttons to an Omron STI SR104P safety relay.
-
G9SP with Numerous Devices
These drawings will explain how to wire the numerous safety
devices to an Omron STI G9SP programmable safety controller. The
input devices include an Omron STI MS4800 light curtain, Omron
F3SJ light curtain, Omron STI OS32C safety laser scanner,
two-channel door switch, two-channel safety mat, and two-channel
Emergency Stop. There is a sample program showing four possible
safety zones for this hypothetical system.
-
Hyper Terminal in Windows 7
Hyper Terminal is a very useful tool to test communications
between your PC and other serial and network devices. However
Microsoft Windows 7 does not include this tool anymore. This
document will show where to put the correct files to make the
old hyper terminal work on a Windows 7 PC.
-
CJ1M to E5CN (CompowayF) and V1000 (Modbus)
This document will show you how to setup the communications to
the Omron E5CN Temperature Controller via Compoway/F and the
Yaskawa V1000 Drive via Modbus.
Previous
TECH-CONNECT files.
Manufacturer's Support Sites




technical@lakewoodautomation.com
(440) 808 4820
Related resources
- Email your questions to our
technical
services dept.
Please include as much information as
possible and attach any related programs, screen shots and error
codes.
- or fax info to (775) 254 4047
- or call (440) 808 4820
Download Files
- Proface CA4-ADPONL-01 Adaptor internal
pinout.
- Z042-E1-04 E5ZD Multipoint Temperature Controller Operation
Manual.
- H060-E1-02 E5ZD Multipoint Temperature Controller Data Sheet.
Useful Links