Omron's 3G3MX2 Compact AC Drives for High Demanding Industrial Applications have many communications options including EtherCAT.

Other Features include:

Open Loop Vector Control for general purpose to high performance applications including conveyors, mixers, fans and pumps. High starting torque: 200% at 0.5 Hz allows starting of high inertia loads. Optional 5 line LCD to allow remote drive programming and monitoring. Safety embedded double input and external device monitor. Built-in PID function eliminates the need for an external controller. Capable of acting as a speed follower to an external pulse generator/encoder signal up to 32 KHz. Side-by-side mounting saves panel space. Restart function allows automatic recovery from momentary power loss.

Omron offers a full range of PLC-based position and motion control solutions. From 2 axis to 30 axis of coordinated Motion control. From simple point-to-point to more complex coordinated control Omron offers a wide range of PLC based modules with Motion Control Network capabilities. PLC based position control units are available with pulse output, network interface and various levels of servo motion functionality. Mechatrolink-II and EtherCAT network options expand performance and node monitoring capabilities; synchronize up to 16 axis of servo motion; and integrate architecture solutions.

 

MS4800 to SR102AM or SR103AM - These drawings will explain how to wire the Omron STI MS4800 light curtain to either an Omron STI SR102AM or SR103AM safety relay.

 

EStop to SR102AM or SR103AM - These drawings will explain how to wire a two-channel Emergency Stop to either an Omron STI SR102AM or SR103AM safety relay.

 

EStop with F3SJ to SR102AM or SR103AM - These drawings will explain how to wire a two-channel Emergency Stop with an Omron F3SJ light curtain to either an Omron STI SR102AM or SR103AM safety relay.

 

EStop with MS4800 to SR102AM or SR103AM - These drawings will explain how to wire a two-channel Emergency Stop with an Omron STI MS4800 light curtain to either an Omron STI SR102AM or SR103AM safety relay.

 

Two Hand Control to SR104P - These drawings will explain how to wire a two-hand control buttons to an Omron STI SR104P safety relay.

 

G9SP with Numerous Devices - These drawings will explain how to wire the numerous safety devices to an Omron STI G9SP programmable safety controller. The input devices include an Omron STI MS4800 light curtain, Omron F3SJ light curtain, Omron STI OS32C safety laser scanner, two-channel door switch, two-channel safety mat, and two-channel Emergency Stop. There is a sample program showing four possible safety zones for this hypothetical system.

 

Hyper Terminal in Windows 7 - Hyper Terminal is a very useful tool to test communications between your PC and other serial and network devices. However Microsoft Windows 7 does not include this tool anymore. This document will show where to put the correct files to make the old hyper terminal work on a Windows 7 PC.

 

CJ1M to E5CN (CompowayF) and V1000 (Modbus) - This document will show you how to setup the communications to the Omron E5CN Temperature Controller via Compoway/F and the Yaskawa V1000 Drive via Modbus.