Lakewood Automation hosts many different trainings and seminars
during the year. Below is 2018 schedule so far. If you would like to
see additional dates or courses, or would like us to host a class at
your facilities please let us know.
technical@lakewoodautomation.com
Unless otherwise specified, the venue will be our Westlake office.
When attending a class, Administrative rights on your PC will be needed.
Download a pdf version of the class schedule. 2018 Training Brochure.pdf
Sysmac Studio PLC Maintenance Basic PLC Advanced PLC Function Block
Please click on one of the calendar dates to sign up for a class.
Lakewood Automation also hosts classes on an as needed bases. Here are some of the other classes we have available. Please contact us for further details.
GPProEx Basics GPProEx Intermediate GPProEx Logic ProServerEX
G9SP & NE1A V1000 VFD Impact VPM
|
Proface GPProEx
Basics Class No scheduled dates at this time. Available upon request. 9am until 3pm Eastern $350 per person. See Billing and Cancellation Policy below. The purpose of the GPProEx Basics class is to introduce an individual to the Proface GPProEx operator interface software. This hands on course is designed for those with little or no prior experience with GPProEx. The topics covered are: Pushbuttons, Lights, Text, Time Display, Graph Display, Switches, Changing Screens, Message Displays, Data Displays and Entries. A good understanding of the Windows operating system will be assumed. A Laptop computer with GPProEx V3.5 or later installed is required. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
![]() |
|
Proface GPProEx
Intermediate Class No scheduled dates at this time. Available upon request. 9am until 3pm Eastern $350 per person. See Billing and Cancellation Policy below. The purpose of the GPProEx Intermediate class is to expand upon the topics covered in the GPProEx Basics Class. This hands on class will cover the following topics: Alarms, Passwords, Recipes, Sampling and Trending. It is recommended to have attended the GPProEx Basics and a good understanding of the Windows operating system will be assumed. A Laptop computer with GPProEx V3.5 or later installed is required. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
|
|
Proface
GPProEx Logic Basics Class No scheduled dates at this time. Available upon request. 9am until 3pm Eastern $350 per person. See Billing and Cancellation Policy below. The purpose of the GPProEx Logic Basics class is to introduce an individual to the Proface GPProEx software when working with internal logic and the Controller class of HMI. This hands on course is designed for those with basic experience using the GPProEx software. The topics covered are: Internal ladder logic, Symbol Variables, Setting up and configuring I/O. Emphasis on how GPProEX software allows for seamless flow between the HMI screen and the physical I/O. It is recommended to have attended the GPProEx Basics and a good understanding of the Windows operating system will be assumed. A Laptop computer with GPProEx V3.5 or later installed is required. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
|
|
Proface
ProServerEx Class No scheduled dates at this time. Available upon request. 9am until 3pm Eastern $350 per person. See Billing and Cancellation Policy below. The purpose of the ProServerEx class is to introduce an individual to the Proface ProServerEx Data Management software. This hands on class will cover the following topics: How does ProServerEx Work, Configure Nodes, Symbols, Monitor Live Data, Triggering Actions, DDE link to Excel and Creating an Excel Report. It is recommended to have attended the GPProEx Basics and Intermediate Class and a good understanding of the Windows operating system will be assumed. A Laptop computer with GPProEx V3.5, ProServer V1.32 and Microsoft Excel 2003, 2007 or 2010 installed is required. Please also bring your own AGP Screen. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
|
|
G9SP/NE1A Programmable Safety Controller
No scheduled dates at this time. Available upon request. 9am until 4pm Eastern $300 per person. See Billing and Cancellation Policy below. Lakewood Automation and Omron cordially invite you to a safety workshop introducing the G9SP & NE1A Programmable Safety Controller. In this hands-on workshop you will learn how to wire, program and troubleshoot with the G9SP & NE1A Safety Controller. You will also increase your knowledge of the benefits of using a Programmable Safety Controller including: * Reduced inventory * Easier troubleshooting * Increased safety * And Increased productivity A Laptop computer with G9SP software & Network Configurator for DeviceNet Safety software are required. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
![]() |
|
Yaskawa
V1000 Class No scheduled dates at this time. Available upon request. 9am until 4pm Eastern $300 per person. See Billing and Cancellation Policy below. The purpose of the V1000 Training Course is to introduce an individual to the basic concepts of a Variable Frequency Drive (VFD) using a mixture of lectures, hands on labs, and simulation software. This course is designed for the individual with little or no prior VFD experience. The topics that are covered in the course are as follows: Drive sizing based upon Horsepower of the motor or Kilowatts of the motor; Installation practices, specifications of the VFD; Electrical installation including wiring, programming of the most common parameters; Troubleshooting; Drive Wizard Industrial software use (free download from Yaskawa's website); and Sample application examples. A good understanding of the Windows operating system will be assumed. A Laptop computer with Drive Wizard Industrial installed and a 9 pin serial port or convertor is required. Also, you must have administrator privileges to install software, drivers, and change the IP address on your PC. |
|
PPT Vision Impact Introduction Seminar No scheduled dates at this time. Available upon request. 9:00am until 1:30pm Eastern This seminar will provide you with some background information on PPT Vision, introduce you to the A, C, T & M Series hardware platforms and give you hands on experience with the most commonly used tools available in the Impact Vision Program Manager V10.0 software. Bring your laptop and we will install the latest version of the Impact software for you to use during the class and to take with you for testing back in your office. The afternoon is available for applications, so bring along your parts and we would be happy to try them out under the camera. You must have administrator privileges to install software, drivers, and change the IP address on your PC. |
|
|